BDYMN - A-1202-152, WHITE
- MSDS: BDYMN
- Manufacturer: KOPPERS CO INC
- Product Name: A-1202-152, WHITE
- National Stock Number: 8010-00-421-2435
Product Identification
Product ID:A-1202-152, WHITE
MSDS Date:01/01/1985
FSC:8010
NIIN:00-421-2435
MSDS Number: BDYMN
Responsible Party
Emergency Phone: 412-227-2000
Cage: LO336
Contractor
Cage: LO336
Ingredients
N-BUTYL ALCOHOL (SARA III)
CAS: 71-36-3
RTECS: EO1400000
OSHA PEL 100 PPM
ACGIH TLV: S, C 50 PPM; 9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
POLYAMIDE
Hazards
Effects of Overexposure:EYE/THROAT/SKIN/LUNG IRRIT
First Aid
First Aid:WASH SKIN THOROUGHLY, FLUSH EYES W/WATER, REMOVE TO FRESH
AIR, REMOVE CONTAM CLOTHING, GIVE ARTIF RESP IF NEEDED, CALL MD. DO
NOT INDUCE VOMIT.
Fire Fighting
Flash Point:99F, 37.2 CC
Extinguishing Media:FOAM, DRY CHEM, FOG, CARBON DIOXIDE
Unusual Fire/Explosion Hazard:AVOID FIRE, HEAT, SPARKS, IGNITION
SOURCES, DIRECT SUNLIGHT
Accidental Release
Spill Release Procedures:VENT AREA, KEEP FROM FLAME, FIRE, SPARKS,
IGNITION SOURCES. DO NOT BREATHE VAPORS. MECH VENT. CLEAN UP
W/ABSORBENT MATL. RESIDUAL ON LG SPILLS.
Handling
Handling and Storage Precautions:KEEP CNTNRS CLOSED, UPRIGHT, AWAY FROM
FIRE, FLAME, SPARKS, IGNITION SOURCES, DIRECT SUNLIGHT
Exposure Controls
Ventilation:LOCAL EXHST
Protective Gloves:GLOVES, RUBBER
Eye Protection:GOGGLES
Supplemental Safety and Health
2-COMPONENT SYSTEM, COMP FORMULA-A 152.KEY1:F4.
Chemical Properties
HCC:F4
Vapor Density:>AIR
Spec Gravity:11.8
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE, VISCOUS LIQ
Percent Volatiles by Volume:55.0
Stability
Stability Indicator/Materials to Avoid:YES
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.